Skip to content

Work report

The work report is the proof that an order was carried out. It is a PDF that is created automatically as soon as an order is completed. It contains what was done, the recorded times, the material used, the photos and the customer’s signature. The customer receives it by email and finds it in the customer portal. You find it in the office on the order.

You do not have to write the report. It is built from what the technician recorded in the app. That is why it pays to work carefully in the app (see Jobs in the app).

The report carries your business letterhead. These sections follow, in this order:

Section Content
Header “Work report” with the order number, “Completed on” with the date and “Technician” with the name.
Customer and service location The customer with their address under “Customer”, the address of the work under “Service location”.
“Order” The subject of the order.
“Tasks & checklist” Each task with “Done” or “Open”, required tasks with “(Required)”. The heading shows the count, for example “(4/5 Done)”. The section is missing if the order has no tasks.
“Time tracking” The times by type: “Travel”, “Work”, “Break”, with the total “Total”. Without times it says “No entries.”
“Material used” Article and quantity per line. The section is missing if no material was recorded.
“Photo documentation” A list of the photos with their name and category: “Before”, “During”, “After”, “Nameplate”, “Damage”, “Material” or “Document”. The names are listed, not the pictures themselves.
“Completion note” The text that the technician wrote under “Work note (optional)” when completing.
“Customer signature” The signature image with “Signed by” (name and role) and “Date”. Or the statement that the customer did not sign (see below).
“Note on completion” Only if the order was completed by force: “This job was completed without the following proof:” with the list of what is missing.
Closing “Thank you for your order.”

The customer gives the signature in the app. The technician hands the device to the customer, and the customer signs with their finger. The office does not sign for the customer.

  1. The technician opens “Complete job”.
  2. There you find the “Work note (optional)” and the area “Customer signature” with the field “Customer name” and the surface “Sign here”.
  3. The customer confirms: “I confirm the work was carried out completely and professionally.” They write their name and sign with their finger. With “Reset” they start again.
  4. The technician confirms the signature (“Confirm signature”) and completes with “Complete”.

How this looks in detail is described under Completion and signature.

The customer may refuse to sign. This is a regulated route, and it is allowed:

  1. The technician taps “Customer refuses to sign”.
  2. They enter the reason under “Reason for refusal (required)”. It does not work without a reason.
  3. They tap “Confirm refusal”.

Instead of a signature image, the report then says: “Customer refused to sign”, plus “Reason” and “Date”. A signature is never faked. For completion, the documented refusal counts as a fulfilled signature.

On the order, in the tab “Documents”, below the document list you find the card “Signature: history”. There you see every version of the customer signature:

  • the type: “Signature” or “Customer refused”,
  • “Current” or “Earlier version”,
  • “Captured after completion” or “Changed after completion”, if the signature only came after completion,
  • “Captured by” and the route (“app”, “web app” or “at completion”),
  • for a refusal, the “Reason”,
  • “View signature” for the image,
  • “Work report with this version”.

Earlier versions are kept and cannot be changed or deleted. If the signature was changed after completion, the card shows: “The signature was changed after completion. The stored work report still shows the earlier version. A newly generated work report shows the current version; the earlier report stays available here.” Then generate the report again (see below).

The app can record the location of the device once at the signature. There is no continuous tracking. You decide whether this happens under “Settings” with the switch “Capture location at signature”. The default is on with the precision “approximate (about 1 km)”. The location stays visible in the office (card “Signature: history”, line “Location at signature”).

It only appears in the PDF and in the customer portal if you switch on “Show location to the customer in the work report”. This is off by default. The report then contains a line “GPS position at signature”. Inform your employees before you use the function (see Privacy).

Viewing the report and downloading it as a PDF

Section titled “Viewing the report and downloading it as a PDF”
  1. Open the order.
  2. Switch to the tab “Documents”.
  3. Click the row with the work report. It opens in a viewer. “Download” saves the PDF file.

The menu on the row also offers “Make customer-visible” and “Delete”.

When an order is completed, eelikField sends the report by itself by email to the customer. This is controlled by the switch “Email the work report to the customer automatically after completion” under “Settings”. The default is on.

The email has the subject line “Your work report A-100 - Your business” (with the order number and the name of your business), the report as a PDF attachment and this text: “your order … has been completed. Please find attached the signed work report as a PDF. All documents are also available in your customer portal.” It also contains the button “View in customer portal” and, if you stored a review address in the settings, the link “Review us on Google”.

If the switch is off, no email goes to the customer after completion. The report remains available in the office and in the customer portal.

On the completed order, the card “Completion” has the button “Regenerate and send work report”. It creates the report again from the current data and sends it to the customer. This also works when the switch is off, because you choose to send explicitly. Afterwards you see “Work report regenerated and sent to the customer.” If no email could be sent, for example because the customer has no address, you see “Work report regenerated (no email sent).” The report is then still on the order.

You need the button in three cases:

  • Creating the report at completion has gone wrong, as an exception.
  • The signature was added or changed after completion.
  • The customer did not get the email.

If you reopened a completed order and complete it again, eelikField asks in the office: “Send the corrected report to the customer?” It says: “This order was reopened. The corrected work report is stored on the order in any case. Should the customer also receive it by e-mail?”

  • “Yes, send to the customer”: The customer receives the corrected report by email.
  • “No, only store it”: No email goes out.

In the customer portal, the report is replaced in any case: the customer sees the corrected version there, even if you choose “No”. If a technician completes the reopened order again in the app, no second email goes out. You can then send the corrected report with “Regenerate and send work report”.

Separate from this, there is the order confirmation. You send it on the order with “Send order confirmation” (see Orders). It is a PDF of its own with the title “Order confirmation”, not a work report.

The customer sees the work report in their customer portal. After completion, the order page says “Order completed” and “Thank you for your trust. Here are all the documents for this order.” The documents are under “Documents”. There you find the files that are released for the customer. How the customer gets into the portal is described under Customer portal.

A file that you mark as “Internal” on the order is not seen by the customer. With “Make customer-visible” you release a file.

  • The report cannot be edited by hand. It is always created anew from the data of the order.
  • There is no report for orders that were never completed.
  • If the order was completed by force, the report states honestly which proof is missing (photo, time, material, signature).
  • Invoices are not part of the work report. For accounting, see Exporting data.

The customer says they did not receive a report. Check whether the switch “Email the work report to the customer automatically after completion” is on and whether the customer has an email address. Send the report with “Regenerate and send work report”. The customer also finds it in the customer portal.

Times or photos are missing in the report. They were not recorded. Add them on the order and generate the report again.

Can I send the report without a signature? Completion needs a signature or the documented refusal. Only the office may deviate from this: it also completes without. The report then says what is missing.

Why is there no location in the report? The switch “Show location to the customer in the work report” is off (the default).