Assets by QR code
An asset is a device at the customer’s site that your business services or installs, for example an air conditioner or a heating system. In the office, assets are in the service book (Assets). In the app, you open an asset on site with the QR sticker on the device. You then see the device data, past services and open jobs at a glance, and can enter a new service.
Opening an asset
Section titled “Opening an asset”- Tap the “Scan QR code” icon at the top right, on the iPhone in “Today” (on Android also in “Jobs”).
- The “Asset” view opens with the scanner. The first time, the phone asks whether the app may use the camera (see Setting up the app).
- Hold the camera on the QR sticker: “Scan the QR code on the device label”.
- As soon as the code is recognised, the app shows the asset.
Without scanning: You can also search for the asset.
- iPhone: Tap the search field “Search assets…” and enter the customer, model, serial number or asset no. (at least two letters). The app shows the results as you type. If there are too many, it says “Keep typing to narrow down”. If there are none, it says “No results for “
”“. - Android: Under the camera image you can enter the asset no. and tap “Search”. If nothing is found, it says “No asset found with this number.”
- Without a camera (or if permission is missing) it says “No camera available here. Enter the asset no. below.” and the search stays usable.
The asset number is on the sticker. The office prints the sticker from the asset’s service book on the web (section “QR code” with the hint “Scan on-site for direct access to the service book.”).
What the asset shows
Section titled “What the asset shows”At the top is the status of the asset: “Active”, “Service due” or “Out of service”. Below that:
| Section | Content |
|---|---|
| Device data | Device type, Manufacturer, Model, Serial number, Room, Installed, Warranty until, Last service, Next service, Interval |
| Service history | The asset’s past entries, for example Maintenance, Repair, Fault or Part, with date and text |
| Open jobs | Open jobs of the customer for this asset. If there are none: “No open jobs.” Tap one and the job opens. |
All roles can view assets, including those of jobs that belong to a colleague. That way you can see on site what has already been done there.
Logging service
Section titled “Logging service”If you have done or noticed something on the asset, enter it in the service book.
- Tap “Log service”. A window opens.
- Choose the type: “Maintenance”, “Repair”, “Fault” or “Part”.
- Under “Description”, write what you did or found, for example the part you replaced (at most 2000 characters). “Save” only becomes active once there is text.
- Set whether the entry is “Visible to customer”. Default: on, except for “Fault”.
- Tap “Save”.
You see “Service entry saved ✓”, and the entry appears at the top of the service history.
| Field | Meaning | Required |
|---|---|---|
| Type | Maintenance, Repair, Fault, Part | yes |
| Description | What was done or noticed | yes |
| Visible to customer | The customer sees the entry in the customer portal | Default: on, off for “Fault” |
Capturing a new asset (iPhone only)
Section titled “Capturing a new asset (iPhone only)”If you are standing in front of a device that is not yet in the service book, you can create it in the job. This works only on the iPhone. On Android the “Capture asset” tile does not exist yet.
-
Open the job and tap the “Capture asset” tile in the documentation.
-
Fill in the fields:
Field Meaning Required Device type For example “Split air conditioner” (at most 120 characters) yes Manufacturer Brand no Model Model name no Serial number Number from the nameplate no Room Where the device is no Interval Maintenance interval as text (at most 60 characters), for example “12 months” no Installed Installation date, default today no Warranty until End of the warranty no -
Optionally take a photo of the nameplate. It is saved as “Nameplate”, internal only.
-
Tap “Save asset”.
The app reports “Asset captured ✓”. The server creates the asset under the job’s customer, with a new asset number, attaches it to the job and writes “captured” in the service book.
Good to know
Section titled “Good to know”- Assets cannot be changed or deleted in the app. The office does that on the web.
- The QR code takes customers who scan it to their customer portal. The service book there only shows what is visible to customers.
- None of this works without a network: loading an asset, logging service, saving an asset. See Working without a network.
Common questions
Section titled “Common questions”The scan finds nothing. Check that the sticker belongs to your business. Try searching by customer or serial number. If the asset has not been created in the office yet, create it on the iPhone with “Capture asset” or ask the office.
Where is the asset in the job? The job has the section “Assets” if an asset is assigned to the job.
Can I find an asset without a QR code? Yes, by searching. A serial number or the asset no. is enough.