Working without a network
On building sites, in cellars and in the countryside, there is often no network. This page says honestly what works then and what does not. In short: the app is not an offline app. Almost every action goes straight to the server and needs a network. A few things are important because they are not lost without a network: running clocks, time entries not yet sent and, on the iPhone, message drafts.
There is no automatic synchronisation. When the network comes back, the app sends nothing by itself. You send time entries that are left over again yourself, or the app fetches them when you complete the job.
How the app detects the network
Section titled “How the app detects the network”If the network is missing, a strip appears at the top:
- iPhone: “No network. Your entries stay on the device.”
- Android: “No network. Running times and unsent time entries stay on the device. Everything else needs a network.”
The strip appears on “Today”, on “Jobs”, in the job, in the time window, in the windows for material, photo and problem, in completion and in the list of open time entries.
If you want to write while the phone reports “offline”, you get the answer “No connection to the server.” straight away. The app does not wait long for an answer but cancels. After about 15 seconds it really tries again at the next tap, in case the network has recovered in the meantime. So if the phone wrongly reports “offline”, this does not lock anything for long.
What works without a network
Section titled “What works without a network”| Function | Behaviour |
|---|---|
| Clocks keep running | A running travel, work or break clock keeps running on the phone, even if you close the app or restart the phone. The duration is calculated from the stored start. |
| “Start” in the time window | Only starts the clock on the phone and therefore also works without a network. |
| “Start work” in the stage “Work” | If the row shows “Time is not running”: only starts the clock and works offline. |
| “Stop” | Ends the clock. The entry does not succeed without a network and stays on the phone as “Not saved yet”. Nothing is lost. |
| Lists already loaded | A loaded list under “Jobs” stays in place, with the strip “No network”. Pulling to refresh reports an error, and the list stays as it is. |
| Message drafts (iPhone) | Text and attachments are saved on the phone and stay until they are sent. |
| Viewing a job | A job that is already open stays on the screen. Call and Navigate work if the number and the address have already been loaded. |
Android also remembers the last loaded list of “Today” and “Jobs” on the device. If the app starts without a network, it shows these states. They belong to the person who is signed in and are deleted when signing out. When the network comes back, “Today” reloads by itself.
What does not work without a network
Section titled “What does not work without a network”| Function | Message or behaviour |
|---|---|
| Signing in, setting up access | “No connection to the server.” or “No connection. Tap the link again later.” |
| Start travel, Arrived, Start work (from “On site”), Pause, Resume | “No connection to the server.” Nothing changes. These steps first set the status on the server. |
| Opening a job that has not been loaded yet | “Could not load the job.” |
| Uploading photos | “Photo upload failed.” The photo is not saved for later. |
| Recording or requesting material, reporting a problem | Error message, entries stay in the window. |
| Ticking off the checklist | “Could not save.” |
| Signature, refusal, completion | Error message. |
| Sending messages, uploading attachments | “Sending failed, please try again.” The draft stays (iPhone). |
| Searching for an asset, recording a service, recording an asset | “No connection to the server.” |
| Viewing the work report | “Preview is currently unavailable.” |
Important: windows with entries (material, photo, problem, signature) stay open if there is an error, and your entries stay in place as long as you do not close the window. If you leave the app or close the window, these entries, unlike time entries and message drafts, are gone.
Time entries without a network in detail
Section titled “Time entries without a network in detail”This is the most important point for your billing. A time is only recorded once the server has confirmed it. Until then, it sits as an entry on the phone:
- You stop a clock, for example with “Stop”. Without a network, the entry fails. (The same happens if the network drops exactly at “Arrived” or “Pause” after the status change.)
- The entry is listed under “Not saved yet” in the time window, in a strip in the job and, on the iPhone, also on “Today” (“2 time entries not saved”) and in the list “My open time entries”.
- When the network is back, tap “Try again” on the entry. More on the messages and buttons is on the page Time and breaks.
- If you tap “Complete”, the app sends the entries that can safely be sent by itself before it closes the job. If that fails, the job is not completed.
The entries are stored separately per person and are kept even after signing out and after a restart.
When the network is back: your routine
Section titled “When the network is back: your routine”- Open “Today” and pull down to reload the state.
- If there is a card “Time entries not saved” (iPhone), tap it. On Android, open the time window of the job. Send the entries with “Try again”.
- If you missed status steps, catch them up, for example “Arrived”.
- Upload missing photos and send messages.
- When the time is correct, complete the job.
Tips for poor reception
Section titled “Tips for poor reception”- Start travel and work before the dead zone, while you still have a network. A status change needs a network.
- A clock that is already running does not need to be touched. Stop it as soon as you have a network again, or add the time afterwards.
- Photos cannot be uploaded without a network. Take them with the normal camera app of the phone and upload them later from the media library (Android: Gallery) via “Choose file”.
- If the office needs to know something immediately, inform it another way and add it in the app later.
Good to know
Section titled “Good to know”- On a phone with several accounts, the times of the signed-in person stay separate from those of others.
- There is no automatic synchronisation. New things appear after reloading, and what has been sent stays sent.
Frequently asked questions
Section titled “Frequently asked questions”I tapped “Pause” in a dead zone and it did not work. What now? Nothing happened: neither status nor time. The work clock keeps running. Only tap “Pause” when there is a network. The time until then counts as working time.
My time entry says “Not saved yet” although I have a network. Tap “Try again”. If it says “Unclear whether it was saved” there, first tap “Check” (Time and breaks).
Can the app be opened at all without a network? Yes. It stays signed in. On Android it shows the last loaded lists. On the iPhone, “Today” shows an error if nothing had been loaded.