Skip to content

Completion and signature

Completion ends the visit. It checks that everything is documented, collects the customer’s signature, closes the job and triggers the work report. After that the job is finished for the office and the customer gets their report. This page walks you through everything step by step.

Completion works the same for every role: even as an owner, you must meet all requirements in the app. Only jobs with several technicians and a team rule have special cases, which are described on the page Completion with a team.

  1. Open the job. If you are at the “Work” stage, tap “Complete job”. (If there is no working time yet, the app first asks “No working time recorded” with “Complete anyway?”, see The visit step by step.)
  2. The “Completion” page opens with the job number. It shows the “Completion requirements”. Take care of anything that is still open.
  3. Tap “Confirm signature” at the bottom. The customer signs on the device (see below).
  4. Back on the Completion page, the button now reads “Complete”. If you like, enter a “Work note (optional)” first, then tap “Complete”.
  5. The app first books any time that is still running, then the server closes the job. After that you see “✓ Completed”. Tap “Close” to go back.

The page has five rows. Each shows a tick when it is met. If one is open, tapping it takes you to the missing step. Below them it says “Tap an open item to take care of it.” If all are met: “All prerequisites met: the order can be completed.”

Row Met when Tapping leads to
Required checklist complete All required checklist items are ticked (if there are none, it is met) back to the job (Checklist)
At least 1 photo There is at least one photo that is visible to the customer the photo window (Photos)
Time recorded At least one “Travel” or “Work” booking is saved (a break alone does not count) the time window (Time)
Material recorded There is no material request, or usage is recorded, or “No material needed” is confirmed the usage window (Material)
Signature captured The customer has signed or the refusal is documented with a reason the signature

The server checks these four things (photo, time, material, signature) itself on completion, in this order, and reports the first one that is missing. It checks the checklist as well.

Message What is missing
“Can’t complete: the required checklist is still open.” Required item
“Can’t complete: at least one photo is missing.” Photo for the customer
“Can’t complete: no time has been recorded.” Travel or work
“Can’t complete: material has not been recorded yet.” Usage or “No material needed”
“Can’t complete: the signature is missing.” Signature or refusal
“Can’t complete: a requirement is not met.” General
“Completion failed.” Unknown error, try again

The row where the server last failed has an exclamation mark. Pull the page down to reload the status.

Tap “Confirm signature” at the bottom. On the iPhone the screen turns to landscape and fills the whole display. Hand the phone to the customer.

  1. On the left the customer sees the form:
    • “Name”: Pre-filled with the contact person’s name from the job. The customer can change it.
    • “Role”: Pre-filled with the contact person’s role, can stay empty.
    • The tick box “I confirm the work was carried out completely and professionally.”
    • Date and time of opening.
  2. On the right is the signing area with the hint “Sign here”. The customer signs with a finger.
  3. With “Reset” at the top they clear the strokes and start again.
  4. The “Confirm signature” button only becomes active when the name, signature and tick are there.
  5. After confirming, you return to the Completion page. The row “Signature captured” has a tick.

If you want to close the window, tap the cross at the top left. If strokes have already been drawn, the app asks first, because strokes are not saved. Name, role and tick are not saved either. They start fresh next time.

If your business has stored a link to its Google review, the app shows a QR code once after the signature: “Happy with our service?” and “Rate us on Google: just scan the QR code with your phone.” The customer scans it with their own phone. The QR code appears only once per job, either after the signature or after completion.

If the customer refuses to sign, document that honestly instead of entering something.

  1. In the signature window, tap the menu with the three dots at the top right and choose “Customer refuses to sign”.
  2. Under “Reason for refusal (required)”, enter what the customer said.
  3. Tap “Confirm refusal”. The button only becomes active once a reason is there.

You see “Refusal recorded ✓”. The row “Signature captured” is now met. The server stores the refusal with your reason and the time, and it deletes any existing signature with name and location. A refusal and a signature exclude each other. The work report says “Customer refused to sign”. The job history shows the entry with the reason. If the customer later signs after all, the real signature replaces the refusal. Earlier versions are kept in the history.

When signing, the app can send the device’s location once to document where the visit took place. There is no continuous tracking. Whether and how precisely this happens is decided by your business on the web under “Settings”, in the section “Location and place data” (see Privacy):

Setting on the web Default Effect
Capture location at signature on If the switch is off, the server discards any coordinates sent.
Location precision approximate (about 1 km) The server rounds before storing. “precise” means about 100 m.
Show location to the customer in the work report off If it is off, the location appears neither in the PDF, nor in the customer portal, nor in an email to the customer. It stays visible in the office.

On the iPhone, the app asks when you open the signature window whether it may use your location (only “While Using the App”) and takes a rough location. If permission is missing or there is no reception, the signature is saved without a location, and nothing waits for it.

On Android, the location question does not come at signing, but once when the app starts after sign-in, and only if your business captures the location at all. At signing the app then shows the sentence “Your approximate location is saved once for this report.” (for “precise”: “Your location is saved once for this report.”). The app rounds the value on the device to your business’s precision (two or three decimal places), so a finer value never leaves the device.

If you decline the location permission, carry on working as normal. Your business must inform its employees before using this feature. A new setting applies to new signatures. It does not change locations that are already saved.

The work report is the PDF for the job. After completion, the server creates it with the signature and files it in the job. It is available in the customer portal. If your business has set the report to be sent automatically (default: on), it goes to the customer by email. Creating and sending takes a few seconds and runs in the background, so you do not have to wait. More on the content and sending: Work report.

Before completing, you can check what the report looks like.

  • iPhone: On the Completion page, tap “View report”. The “Work report” opens as a PDF with the job number. You can zoom. While it loads it says “Loading report…”, and on an error “Preview is currently unavailable.” with “Try again”. The preview has changed nothing, it only creates the report for viewing. There is no share button there.
  • Android: The same window, with a share icon at the top. It opens Android’s share sheet with the PDF, for example to send by email or messenger. The “View report” button also appears after completion on the confirmation screen.

Otherwise the customer gets their report automatically by email, if an address is stored.

  • Job: It is set to “Completed”. All still open appointments of the job are “Completed”, including those of colleagues.
  • Time: Running time was booked beforehand. If that fails, the job is not closed (“Completion stopped: the running time was not saved. Please try again.”).
  • Assets: If an asset is attached to the job, it gets an entry in the service book (“Maintenance” or, for an installation, “Installation”) with your work note or the text “Job … completed”. For maintenance, the server resets the date of the last service and, if an interval is set, schedules the next one.
  • Office: Everyone with an office role receives the notification “Job completed” with the job number and your name. The other technicians on the job receive it too.
  • Work report: See above.
  • A completed job cannot be reopened from the app. Only the office can do that on the web. If someone completes a job that the office has reopened a second time from the app, no second email goes to the customer. The office can send the corrected report from the job if needed.
  • Everything needs a network: signature, refusal and completion go straight to the server. Without a network the app says “No connection to the server.” Time that is still running stays on the device.
  • The work note (at most 2000 characters) is saved on the job. If assets are attached to the job, it serves as the text of the service book entry.
  • If the job has been cancelled in the meantime, the server responds: on Android you then see “The job has been cancelled.”
  • “Continue without signature” does not exist on the iPhone or on Android. If the customer does not sign, the documented refusal is the only way.

The “Complete” button is missing, it says “Confirm signature”. As long as no signature and no refusal is captured, the footer button first leads to the signature. Only afterwards does it say “Complete”.

Can the customer sign later? The signature can be taken at any time before completion, even straight after the work. A documented refusal can later be replaced by a real signature.

The customer has no email address. Then the report cannot go to the customer by email. It is still in the job. On Android you can pass it on with the share icon.

I am the owner and work alone. Do I have to take the photos myself? Yes, the requirements apply to every completion from the app, including yours. The “Force completion” button only exists for jobs with a team rule, see Completion with a team. As an owner you can also complete a job on the web, see Jobs in the office.